|
Silicon-Power Launches the 128GB 2.5-inch SATA II SSD |
| Written by Administrator, on 30-06-2008 21:00 |
| Editor's rating |
 |
|
| Average user rating |
(0 vote) |
|

Silicon-Power, today launches its SATA II 128GB 2.5-inch Solid State Disk. The SATA II interface has 3.0Gbps bandwidth which is doubled compared with the previous SATA I interface. Also, with the new “differentia-signa-amplified-system”, the transfer rate can up to 300MB/s while executing the huge amount of data. Unlike the traditionahard drive, The Silicon-Power SSD has no physicacontact with the storage device or moving parts, and it equipped with the most advance Wear Leveling technology to ensure the durability of usage. Furthermore, it carries shockproof and anti-vibration features, and provides user with high efficiency and gigantic capacity. The Silicon-Power SATA II 2.5” SSD can be widely used in various purposes with any criticaworking environments.
Silicon-Power’s 2.5-inch SATA II SSD comes in a standard 2.5-inch size and the SATA II interface (downward compatible with SATA I) can easily be used on PCs, notebooks or other mobile devices which support 2.5-inch SATA/ SATA II interface. Base on the different theoreticaof the storage technology, the power consumption of SSD can be 80% lower compare to the traditionahard drive. The Silicon-Power’s 2.5-inch SATA II SSD has complied with Europe RoHS standards and currently available in 8GB, 16GB, 32GB, 64GB and 128GB capacities
Features
- Reading speed of 120MB/sec, writing speed of 70MB/sec
- Compatible with SATA II interface (Downward compatible with SATA I)
- ROHS Compliant
- High performance and reliability
- Low Power Consumption
- Shock resistance
- No noise, No latency delay and No seek error
Specification
- Dimensions:100mm x 69.85mm x 9.5mm
- Weight:90g
- Durability:10,000 insertions(minimum)
- Power Requirement:4.5V~5.5V
- Operating Temperature: 0ºC ~ 70ºC
- Storage Temperature:-40ºC ~ 85ºC
- Humidity 8% to 95%
- Vibraion:15G peak-to-peak max
- Shock: 1500G Max
- 2 years warranty
|